TRIT — Triaxial Tests - Total Stress - Data¶
Path: PROJ → LOCA → SAMP → TRIG → TRIT · Family: Soil Strength, Consolidation & Deformation Tests
Editions: 4.0.3 – 4.2
Key chain
Identified by LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH, TRIT_TESN. Inherits LOCA_ID, SAMP_ID, SAMP_REF, SAMP_TOP, SAMP_TYPE, SPEC_DPTH, SPEC_REF from TRIG.
| Heading | Status | Type | Unit | Editions | Description |
|---|---|---|---|---|---|
LOCA_ID (key) |
KEY | ID |
Location identifier | ||
SAMP_TOP (key) |
KEY | 2DP |
m | Depth to top of sample | |
SAMP_REF (key) |
KEY | X |
Sample reference | ||
SAMP_TYPE (key) |
KEY | PA |
Sample type | ||
SAMP_ID (key) |
KEY | ID |
Sample unique identifier | ||
SPEC_REF (key) |
KEY | X |
Specimen reference | ||
SPEC_DPTH (key) |
KEY | 2DP |
m | Depth to top of test specimen | |
TRIT_TESN (key) |
KEY | X |
Triaxial test/stage reference | ||
TRIT_SDIA |
OTHER | 2DP |
mm | Specimen diameter | |
TRIT_SLEN |
OTHER | 2DP |
mm | Specimen length | |
TRIT_IMC |
OTHER | X |
% | Specimen initial water/moisture content | |
TRIT_FMC |
OTHER | X |
% | Specimen final water/moisture content | |
TRIT_CELL |
OTHER | 0DP |
kPa | Total cell pressure | |
TRIT_DEVF |
OTHER | 0DP |
kPa | Corrected deviator stress at failure | |
TRIT_BDEN |
OTHER | 2DP |
Mg/m3 | Initial bulk density | |
TRIT_DDEN |
OTHER | 2DP |
Mg/m3 | Initial dry density | |
TRIT_STRN |
OTHER | 2SF |
% | Axial strain at failure | |
TRIT_CU |
OTHER | 0DP |
kPa | Undrained Shear Strength at failure | |
TRIT_MODE |
OTHER | PA |
Mode of failure | ||
TRIT_REM |
OTHER | X |
Comments | ||
FILE_FSET |
OTHER | X |
Associated file reference (e.g. test result sheets) | ||
TRIT_FZWC |
OTHER | X |
% | since 4.1 | Failure zone water content, if measured |
TRIT_RATE |
OTHER | 2SF |
%/min | since 4.1 | Mean rate of shear |