IDEN — In Situ Density Tests¶
Path: PROJ → LOCA → IDEN · Family: In-Situ Penetration & Strength Tests
Editions: 4.0.3 – 4.2
Key chain
Identified by LOCA_ID, IDEN_DPTH, IDEN_TESN. Inherits LOCA_ID from LOCA.
| Heading | Status | Type | Unit | Editions | Description |
|---|---|---|---|---|---|
LOCA_ID (key) |
KEY | ID |
Location identifier | ||
IDEN_DPTH (key) |
KEY | 2DP |
m | Depth of in situ density test | |
IDEN_TESN (key) |
KEY | X |
Test reference | ||
IDEN_DATE |
OTHER | DT |
yyyy-mm-dd | Test date | |
IDEN_TYPE |
OTHER | PA |
Type of density test performed | ||
IDEN_IDEN |
OTHER | 2DP |
Mg/m3 | In situ bulk density (after any calibration / corrections applied, i.e. reported value) | |
IDEN_MC |
OTHER | X |
% | Water/moisture content relating to in situ test (after any calibration / corrections applied, i.e. reported value) | |
IDEN_STAB |
OTHER | 2SF |
% | Amount of stabiliser added | |
IDEN_STYP |
OTHER | X |
Type of stabiliser added | ||
IDEN_REM |
OTHER | X |
Remarks | ||
IDEN_ENV |
OTHER | X |
Details of weather and environmental conditions during test | ||
IDEN_METH |
OTHER | X |
Test method | ||
IDEN_CONT |
OTHER | X |
Name of testing organization | ||
IDEN_CRED |
OTHER | X |
Accrediting body and reference number (when appropriate) | ||
TEST_STAT |
OTHER | X |
Test status | ||
GEOL_STAT |
OTHER | X |
Stratum reference shown on trial pit or traverse sketch | ||
FILE_FSET |
OTHER | X |
Associated file reference (e.g. test result sheets) | ||
IDEN_OPER |
OTHER | X |
since 4.2 | Name of test operator |