CPDT — Pore Pressure Dissipation Tests (PPDT) - Data¶
Path: PROJ → LOCA → CPTG → CPDG → CPDT · Family: In-Situ Penetration & Strength Tests
Editions: 4.2
New in AGS 4.2
This group was introduced in AGS edition 4.2.
Key chain
Identified by LOCA_ID, CPTG_TESN, CPDG_DPTH, CPDT_TIME. Inherits CPDG_DPTH, CPTG_TESN, LOCA_ID from CPDG.
| Heading | Status | Type | Unit | Description |
|---|---|---|---|---|
LOCA_ID (key) |
KEY | ID |
Location identifier | |
CPTG_TESN (key) |
KEY | X |
Test reference or push number | |
CPDG_DPTH (key) |
KEY | 2DP |
m | Inclination corrected depth of dissipation test |
CPDT_TIME (key) |
KEY | 1DP |
s | Elapsed time since start of test |
CPDT_QC |
OTHER | 3DP |
MPa | Cone resistance (q_c) |
CPDT_TF |
OTHER | 3DP |
kN | Total force or thrust |
CPDT_FS |
OTHER | 4DP |
MPa | Sleeve friction (f_s) |
CPDT_U1 |
OTHER | 4DP |
MPa | Face porewater pressure (u_1) |
CPDT_U2 |
OTHER | 4DP |
MPa | Shoulder porewater pressure (u_2) |
CPDT_U3 |
OTHER | 4DP |
MPa | Top of sleeve porewater pressure (u_3) |
CPDT_TMPI |
OTHER | 1DP |
DegC | Cone internal temperature. If multiple temperature sensors exist, then the sensor closest to the pore pressure sensors should be used. |
CPDT_REM |
OTHER | X |
Comments | |
FILE_FSET |
OTHER | X |
Associated file reference (e.g. test result sheets) |