PMTG — Pressuremeter Test Results - General¶
Path: PROJ → LOCA → PMTG · Family: In-Situ Loading, Deformation & Geophysics
Editions: 4.0.3 – 4.2
Key chain
Identified by LOCA_ID, PMTG_DPTH, PMTG_TESN. Inherits LOCA_ID from LOCA.
| Heading | Status | Type | Unit | Editions | Description |
|---|---|---|---|---|---|
LOCA_ID (key) |
KEY | ID |
Location identifier | ||
PMTG_DPTH (key) |
KEY | 2DP |
m | Depth of test | |
PMTG_TESN (key) |
KEY | X |
Test reference | ||
PMTG_DATE |
OTHER | DT |
yyyy-mm-dd | Date of test | |
PMTG_WAT |
OTHER | 2DP |
m | Measured or assumed ground water level | |
PMTG_CONT |
OTHER | X |
Subcontractors name | ||
PMTG_CREW |
OTHER | X |
Operators details | ||
PMTG_REF |
OTHER | X |
Instrument reference / serial number | ||
PMTG_TYPE |
OTHER | PA |
Pressuremeter type | ||
PMTG_DIAM |
OTHER | 2DP |
mm | Uninflated diameter of pressuremeter | |
PMTG_HO |
OTHER | 0DP |
kPa | Estimated in situ horizontal stress | |
PMTG_GI |
OTHER | 0DP |
MPa | Initial shear modulus | |
PMTG_CU |
OTHER | 0DP |
kPa | Undrained shear strength | |
PMTG_PL |
OTHER | 0DP |
kPa | Limit pressure | |
PMTG_AF |
OTHER | 1DP |
deg | Angle of friction | |
PMTG_AD |
OTHER | 0DP |
deg | Angle of dilation | |
PMTG_AFCV |
OTHER | 1DP |
deg | Angle of friction at constant volume (*cv) used | |
PMTG_METH |
OTHER | X |
Method(s) used to determine derived soil parameters (including those in PMTL). | ||
PMTG_CRED |
OTHER | X |
Accrediting body and reference number (when appropriate) | ||
TEST_STAT |
OTHER | X |
Test status | ||
PMTG_ENV |
OTHER | X |
Details of weather and environmental conditions during test | ||
PMTG_REM |
OTHER | X |
Remarks | ||
FILE_FSET |
OTHER | X |
Associated file reference (e.g. equipment calibrations) | ||
PMTG_NUAR |
OTHER | 0DP |
since 4.1 | Number of arms | |
PMTG_ORNT |
OTHER | 0DP |
deg | since 4.1 | Bearing of arm 1 (clockwise degrees from North) |
PMTG_AXIS |
OTHER | X |
since 4.1 | Arm combination used for analysis | |
PMTG_PRWL |
OTHER | 2DP |
m | since 4.2 | Depth to water/fluid in borehole prior to test |
PMTG_TC |
OTHER | PA |
since 4.2 | Method of test control | |
PMTG_STAD |
OTHER | DT |
yyyy-mm-ddThh:mm:ss | since 4.2 | Start of drilling of SBPM |
PMTG_ENDD |
OTHER | DT |
yyyy-mm-ddThh:mm:ss | since 4.2 | End of drilling of SBPM |
PMTG_TOPP |
OTHER | 2DP |
m | since 4.2 | Depth to top of test pocket for SBPM |
PMTG_BOTP |
OTHER | 2DP |
m | since 4.2 | Depth to base of test pocket for SBPM |
PMTG_SBHT |
OTHER | PA |
since 4.2 | Self-boring head type of SBPM | |
PMTG_SBCS |
OTHER | 1DP |
mm | since 4.2 | Self-boring cutting shoe diameter, dp, of SBPM |
PMTG_SBCT |
OTHER | PA |
since 4.2 | Cutter type of SBPM | |
PMTG_SBCD |
OTHER | 1DP |
mm | since 4.2 | Cutter dimension of SBPM |
PMTG_SBCP |
OTHER | 0DP |
mm | since 4.2 | Cutter position, h (+ve inside cutting shoe, -ve outside cutting shoe) of SBPM |
PMTG_FLFT |
OTHER | X |
since 4.2 | Flushing fluid type of SBPM | |
PMTG_FLFP |
OTHER | 0DP |
kPa | since 4.2 | Flushing or jetting fluid pressure of SBPM |
PMTG_TRST |
OTHER | 0DP |
kN | since 4.2 | Thrust force of SBPM |
PMTG_PPRD |
OTHER | YN |
since 4.2 | Pore pressures recorded during boring | |
PMTG_CMT |
OTHER | PA |
since 4.2 | Cone module type | |
PMTG_CREM |
OTHER | X |
since 4.2 | Describe corrections applied during processing | |
PMTG_CRDT |
OTHER | DT |
yyyy-mm-dd | since 4.2 | Date of last calibration of instrument |
PMTG_ANBY |
OTHER | X |
since 4.2 | Name(s) of analyser / person responsible for data quality and correctness |