CTRG — Cyclic Triaxial Test - General¶
Path: PROJ → LOCA → SAMP → CTRG · Family: Soil Strength, Consolidation & Deformation Tests
Editions: 4.1 – 4.2
New in AGS 4.1
This group was introduced in AGS edition 4.1.
Key chain
Identified by LOCA_ID, SAMP_TOP, SAMP_REF, SAMP_TYPE, SAMP_ID, SPEC_REF, SPEC_DPTH. Inherits LOCA_ID, SAMP_ID, SAMP_REF, SAMP_TOP, SAMP_TYPE from SAMP.
| Heading | Status | Type | Unit | Description |
|---|---|---|---|---|
LOCA_ID (key) |
KEY | ID |
Location identifier | |
SAMP_TOP (key) |
KEY | 2DP |
m | Depth to top of sample |
SAMP_REF (key) |
KEY | X |
Sample reference | |
SAMP_TYPE (key) |
KEY | PA |
Sample type | |
SAMP_ID (key) |
KEY | ID |
Sample unique identifier | |
SPEC_REF (key) |
KEY | X |
Specimen reference | |
SPEC_DPTH (key) |
KEY | 2DP |
m | Depth to top of test specimen |
SPEC_DESC |
OTHER | X |
Specimen description | |
SPEC_PREP |
OTHER | X |
Specimen preparation technique used | |
SPEC_BASE |
OTHER | 2DP |
m | Depth to base of specimen |
CTRG_TYPE |
OTHER | PA |
Type of test | |
CTRG_MCI |
OTHER | X |
% | Initial water/moisture content |
CTRG_MCF |
OTHER | X |
% | Final water/moisture content |
CTRG_H2O |
OTHER | X |
Description of type of water used for filter flushing, and salt content if relevant | |
CTRG_SBP |
OTHER | 1DP |
kPa | Saturation back pressure |
CTRG_SATR |
OTHER | 0DP |
% | Initial degree of saturation after back pressure |
CTRG_IRD |
OTHER | 1DP |
% | Initial sample relative density |
CTRG_SDIA |
OTHER | 2DP |
mm | Initial specimen diameter |
CTRG_HIGT |
OTHER | 2DP |
mm | Initial height of specimen |
CTRG_TMSS |
OTHER | 2DP |
g | Total mass of installed specimen |
CTRG_PDEN |
OTHER | XN |
Mg/m3 | Particle density with prefix # if value assumed |
CTRG_MADD |
OTHER | 2DP |
Mg/m3 | Maximum density of sand |
CTRG_MIDD |
OTHER | 2DP |
Mg/m3 | Minimum density of sand |
CTRG_DDEN |
OTHER | 2DP |
Mg/m3 | Initial dry density |
CTRG_BDEN |
OTHER | 2DP |
Mg/m3 | Initial bulk density |
CTRG_IVR |
OTHER | 3DP |
Initial voids ratio | |
CTRG_SAT |
OTHER | X |
Method of saturation | |
CTRG_DURN |
OTHER | 1DP |
day | Test Duration |
CTRG_REM |
OTHER | X |
Remarks | |
CTRG_METH |
OTHER | X |
Test method | |
CTRG_DEV |
OTHER | X |
Deviations from the test method | |
CTRG_LAB |
OTHER | X |
Name of testing laboratory/organization | |
CTRG_CRED |
OTHER | X |
Accrediting body and reference number (when appropriate) | |
TEST_STAT |
OTHER | X |
Test status | |
FILE_FSET |
OTHER | X |
Associated file reference (e.g. equipment calibrations) |